After a long run-out, it's always a welcome sight -- a fat bolt and a
Stainless Steel Bolt Hanger. S.S. Hangers are designed for use at
belay stations, protection points (where no other option exists) and for
rescue and rigging work. The clip-in point is large enough to
accommodate two carabiners. Enviro Bolt Hangers are powder-coated to blend
in with the rock as are the Rap Hangers. Designed specifically for belay
and rappel stations, the Rap Hangers allow the rope to be threaded
directly through the anchor for lowering or rappelling; they are
unquestionably the best and lowest visual impact anchor out there.
Price: $2.95 ea.
304 Stainless Steel
4
mm thick
Coined radius on the carabiner-bearing surface
Bolt hole fits 3/8" or 10 mm bolts or 1/2" full-sleeve bolts
Designed specifically for belay
and rappel stations, the Rap Hangers allow the rope to be threaded
directly through the anchor for lowering or rappelling; they are
unquestionably the best and lowest visual impact anchor out there.
Price: $5.95 ea.
For belay and rappel anchors
4130 CroMoly steel
Radiused rope/carabiner-bearing surface
is as wide as a standard carabiner
Can be threaded with the rope and lowered
from directly
Bolt hole fits 3/8" or 10 mm bolts or
1/2" full-sleeve bolts